OLI-AQUA MODU T 18.32

TESTING STANDARDS

• EU Decopaint compliant
• DIN 71-3 (Safety of toys)
• DIN 53160 (saliva- and perspiration-resistant)
• DIN 68861 T1,T4, B, C (chemical resistance)
• DIN 4102/B1 (difficult to ignite)
• Free from formaldehyde and aromatics
• Free from NMP, NEP and APEO
  

CARE & CLEANING

To keep the staircase looking beautiful for a long time and ensure years of enjoyment, it must be cared for and cleaned regularly and, above all, correctly. A coordinated care concept ensures a long service life and lasting surface quality.

In addition to daily dry cleaning, the parquet cleaner OLI-AQUA CARE is highly suitable for damp mopping and can simply be added directly to the mop water. Occasional refreshing with the parquet maintenance product OLI-AQUA POLISH protects against foot traffic marks and scratches.

APPLICATION

Processing instructions:

• Optimal processing conditions at +20°C and 50% relative humidity.
• Stir the container contents thoroughly before removing material! Always reseal the container well after removing material to protect the contents from drying out (skin formation).
• All fittings carrying material must be made of stainless steel.
• Clean the spray gun with water immediately after use.
• Do not process below +15°C.
• For 2K application, stir in Hardener 13.2. Mixing ratio 10:1. After the viscosity increases, add a maximum of 5% tap water. The pot life is max. 4 hours.
• A repair build-up can be applied with MODU T 1K+2K after sanding and dust removal.
• Surface preparation:

Progressive sanding of the wood with grit 150/180. The finer the sanding, the less the wood can be raised.

• The surface must be dry, thoroughly cleaned, and free of oil, wax, grease, silicone, and sanding dust.
• Resin-rich and extractive-rich woods such as pine and tropical woods (Limba, Teak, Wengé) must be stripped with 2K lacquer MODU T at a ratio of 10:1 before coating. This also applies to MDF edges and profiles to minimize swelling under conditions of high humidity.
• Recommended system:
  
  

Prime with approx. 100-120 g/m² of material.

• After 2 hours of drying, intermediate sanding with grit 240 follows.
• Final coating with approx. 100-120 g/m².
• Spraying with a cup gun

Spray pressure: 2.0-3.0 bar

• Nozzle size: 1.8-2.0 mm
• Water addition: Max. 5%
• Viscosity (4 mm): 100-130 sec.
  
• Spraying with airless/airmix
  

Spray pressure: 90-120 bar

• Nozzle size: 0.25-0.33 mm
• Water addition: Max. 5%
• Viscosity (4 mm): 100-130 sec.
• Drying times:

Dust dry: 1 hr.

• Sandable: 2-3 hrs.
• Stackable: 16 hrs.
• Stapelfähig: 16 Std.

SAFETY INFORMATION

P102 Keep out of reach of children.

Contains 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one,
2-methyl-2H-isothiazol-3-one. May produce an allergic reaction.

EUH210 Safety data sheet available on request.