This OLI-AQUA MODU B 18.35 I 1K+2K- color lacquer is a fast-drying water-based lacquer system for the colored spray coating of furniture surfaces.
The pigmented lacquer can be used indoors for coating wood and wood-based materials - furniture, panels, moldings, cladding, doors, and stairs.
This color lacquer is characterized by its very good filling and hiding power, lightfastness, and adhesion. The abrasion-resistant coating is resistant to perspiration and chemicals. At the same time, the surface has a smooth, satin-gloss appearance.
For normal use, this color lacquer can be applied without the hardener component. For demanding applications, such as stairs and high ring resistance, MODU B can be applied with OLI-AQUA Hardener 13.2 at a mixing ratio of 10:1. Depending on the required quality, direct coating of well-sanded and cleaned foils is also possible without a primer. Pre-filling raw MDF with OLI-AQUA 15.88 I 1K insulating filler. is recommended. To protect the color lacquer and achieve a specific gloss level, the surface can be topcoated with our clear lacquers OLI-AQUA MODU T, OLI-AQUA PRO M, or OLI-AQUA NORDIC. The latter is particularly recommended when an ultra-matte finish is desired.
The pigmented lacquer can be applied quickly using a cup gun, airless, or airmix spray equipment. It has good sag resistance on vertical surfaces and provides an even flow. The coating is dry after just two to three hours and can then be further processed.
TESTING STANDARDS
- EU Decopaint compliant
- DIN 71-3 (Safety of toys)
- DIN 53160 (resistant to saliva and perspiration)
- DIN 68861 Parts 1 and 4, B, C (chemical resistance)
- DIN 4102/B1 (difficult to ignite)
- Free from formaldehyde and aromatic compounds
- Free from NMP, NEP and APEO
APPLICATION
Application instructions:
- Optimal application conditions at +20°C and 50% relative humidity.
- Stir the contents thoroughly before removing material!
- Always reseal the container thoroughly after removing material to protect the contents from drying out (skin formation)
- All fittings carrying material must be made of stainless steel.
- Clean the spray gun with water immediately after use.
- Do not apply below +15°C.
- For 2K application, stir in Hardener 13.2. After the viscosity increases, add a maximum of 5% tap water. The pot life is a maximum of 4 hours.
- High-quality products can be topcoated with MODU T and NORDIC as a 2-component coating. If topcoated on the same day, no intermediate sanding is required. Overnight drying makes intermediate sanding mandatory.
Surface preparation:
- Gradual wood sanding with grit 150/180. The finer the sanding, the less the wood can roughen.
- The surface must be dry, thoroughly cleaned, and free of oil, wax, grease, silicone, and sanding dust.
- Pre-treat the surface with OLI-AQUA 15.88 I 1K insulating filler.
- Resin-rich and extractive-rich woods such as pine and tropical woods (Limba, teak, Wengé) must be isolated with 2K coating MODU T in a 10:1 ratio before coating. This also applies to MDF edges and profiles to minimize swelling under high-humidity conditions.
Cup gun spraying
- Spray pressure: 2.0-3.5 bar
- Nozzle size: 1.8-2.0 mm
- Water addition: Max. 5%
- Viscosity (4 mm): 40-60 sec.
Airless/Airmix spraying
- Spray pressure: 90-120 bar
- Nozzle size: 0.25-0.33 mm
- Water addition: Max. 5%
- Viscosity (4 mm): 40-60 sec.
Drying times:
- Dust dry: 1 hr.
- Sandable: 2-3 hrs.
- Stackable: 16 hrs.
SAFETY INFORMATION
P102 Keep out of reach of children.
EUH208 Contains 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one,
2-methyl-2H-isothiazol-3-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one
and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
EUH210 Safety data sheet available on request.
EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Aerosol
Any questions? - We’re happy to help!
Frequently bought together
*gilt für Lieferungen innerhalb Deutschlands, Lieferzeiten für andere Länder finden Sie in den Versandbedingungen