HS Professional Oil, colored, 20ml

• GISCODE: Ö20+ for 1-component application / Ö20+/DD for 2-component application
• EU Decopaint compliant
• Z-157.10-17 (emissions-tested construction product according to DIBt principles)
• DIN 71-3 (Safety of toys)
• DIN 53160 (resistant to saliva and perspiration)
• Free from formaldehyde, aromatic compounds, biocides, preservatives, cobalt and oximes

PREPARATION 

• Sand the wood surface professionally: Final sanding for furniture, max. 180 grit; for stairs and floors, 120 grit. Then thoroughly remove dust from the surface. Remove dust thoroughly.
• Optional: Clean the surface with PreOilCleaner and water.
• Wood moisture: 8–12 %
• Substrate: Firm, dry, clean, sound and free of separating agents.
• Application: Apply at room temperature.

⚠️ NOTE (if pre-treating with reactive stain for oak):

• When using OLI-NATURA Antique Reactive Stain, do not wet the surface beforehand and do not clean it with PreOilCleaner For 2K application (A+B components). 

Shake/stir the A+B components thoroughly beforehand.

• Mix at a ratio of 10:1 (A:B)
• Mix thoroughly for approx. 1-2 minutes until a homogeneous mixture is obtained. Tip:
• Only mix as much as can be applied within approx.3 hours . APPLICATION ON FURNITURE, STAIRS, WORKTOPS 

Stir/shake the oil thoroughly before use.

1. (Optional) For 2K application, thoroughly mix component A (oil) and component B (hardener) at a ratio of 10:1 until a homogeneous mixture is obtained. 
2. Depending on the object's geometry, apply the oil with a brush, roller or directly to the surface, then distribute and work it in evenly by hand or with an orbital sander using a beige pad. Make sure the surface is wetted evenly. If the oil is absorbed too quickly, apply a little more oil.
3. Allow the oil to penetrate for a few minutes, then polish off the excess oil with a white polishing pad by hand or with an orbital sander until the surface is saturated and no longer appears wet. If there is too much oil on the surface, remove the excess with a cloth before polishing.
   The surface must not feel sticky.
4. Lassen Sie das Öl einige Minuten einziehen und polieren Sie das überschüssige Öl so lange mit einem weißen Polierpad per Hand oder Exzenterschleifer aus, bis die Oberfläche gesättigt und nicht mehr nass erscheint. Steht zu viel Öl auf der Oberfläche, Überschuss vor dem Auspolieren mit einem Tuch abnehmen.
   Die Oberfläche darf sich nicht klebrig anfühlen. 
5. If needed, polish again the following day with a white polishing pad and a small amount of oil (5-10 ml/m²).

APPLICATION ON FLOORS

1. (Optional) For 2K application, thoroughly mix component A (oil) and component B (hardener) at a ratio of 10:1 until a homogeneous mixture is obtained. 
2. Depending on the object's geometry, apply the oil with a brush, roller or directly to the surface, then distribute and work it in evenly by hand or with an orbital sander using a beige pad. Make sure the surface is wetted evenly. If the oil is absorbed too quickly, apply a little more oil.
3. Apply the oil evenly in a thin layer using a spatula, oil roller, or oil brush. Work in sections of 5 to 15 m². Apply more oil to dry areas.
4. Within 60–90 minutes, work in with a single-disc or polishing machine (beige pad) until the wood is saturated. Alternatively, use a beige Super Hand Pad and pad holder for a telescopic handle. 
5. For the final polish and to remove any excess oil, polish the surface by hand or with a polishing machine using an oil-absorbing cloth or white polishing pad. Do not leave any excess oil on the surface.

TECHNICAL DATA: 

COVERAGE: 1 coat, depending on the type of wood and the absorbency of the substrate, approx. 20-40 ml/m² per coat (approx. 25-50 m²/l).

DRYING: Depending on humidity and temperature, the surface is dust-dry after 1-2 hours and fully cured after 2-3 days. During this time, protect it from water, do not clean it with moisture, and handle it gently. At low temperatures and high humidity, drying time is extended accordingly.

STORAGE: In the unopened original container, the oil has a shelf life of approx. 24 months, and the hardener has a shelf life of approx. 6 months . Store in a cool, dry place. Use as soon as possible after opening. 
Important: After dispensing, clean the container opening to prevent the closure from sticking due to dried oil or hardener residue.

CLEANING WORK EQUIPMENT:  OLI-NATURA brush cleaner or oil thinner.

⚠ Safety information:
Oil-soaked cloths and rags can self-ignite due to heat buildup. After use, store them in an airtight metal container or immerse them in water. luftdicht in einem Metallbehälter aufbewahren oder in Wasser tauchen. 

Oiled wood surfaces retain their natural charm through regular cleaning and care. Dust and light dirt can be removed with a dry or slightly damp cloth - never wipe with a wet cloth! Parquet should ideally be vacuumed or swept daily, as sand can cause fine scratches.

OLI-NATURA wood soap cleans gently without damaging the wood. For refreshing the surface, use OLI-NATURA maintenance oil or - for light shades - OLI-NATURA Refresher. Alternatively, the colored HS Professional Oil can be mixed in a 1:2 ratio with OLI-NATURA Oil Thinner and used as a pigmented maintenance oil.

Care intervals depend on use and wear. If the surface becomes dull or repels water less effectively, it is time for re-oiling

The product is not subject to labeling requirements. The mixture is not classified as hazardous within the meaning of Regulation (EC) No. 1272/2008. It does not need to be labeled with GHS hazard pictograms or signal words and is not classified as dangerous goods. 

Safety instructions

Oil-soaked rags/pads can self-ignite due to heat accumulation! Therefore, clean them immediately after use or store them under water. Keep out of reach of children.
P102 Keep out of reach of children