Wellness for wood: This naturally curing maintenance oil for oiled wood surfaces has many beneficial properties: It refreshes the “faded” color of the wood, gives the surface new depth and radiance, absorbs very quickly, and replenishes the pores with fresh oil. This renews the protective effect and, consequently, the resistance of the surface. It is particularly recommended for the initial treatment and refreshing of parquet and floorboards, stairs, and wooden furniture indoors that have been treated with oxidatively drying impregnating oils.
The maintenance oil, which is based on natural oils, is unpigmented. Nevertheless, it enhances the wood grain and color. Thanks to its low viscosity, it is easy to apply: For small pieces of furniture, simply apply a little maintenance product to a lint-free cotton cloth or polishing pad and wipe it over the surface to be treated. To refresh wooden stairs, apply the maintenance oil sparingly with a polishing pad, distribute it, and polish it with a cotton or oil-absorbing cloth. To care for parquet and floorboards, the maintenance oil can also be applied evenly in a thin layer with a sprayer and, after a short contact time, polished by hand or with a single-disc machine using a polishing pad.
The wood care product contains only ingredients necessary for its purpose. Its main component is refined linseed oil, supplemented with medical-grade isoparaffin for optimal self-penetration.
WHEN TO APPLY: The intervals at which the wood surface needs to be refreshed depend on the level of wear. Good indications that the surface needs care are when its water resistance decreases, the color depth fades, and/or the surface feels dry and dull. The surface should then be re-oiled.
The maintenance oil is also available in the Care Set No. 1.
To test the effect of the oil, we offer you a practical sample size.
- GISCODE Ö60+
- DIBt-tested construction product
- DIN 71-3 (Safety of toys)
- DIN 53160 (resistant to saliva and perspiration)
- Cobalt-free & oxime-free, FREE from formaldehyde, aromatics, biocides, preservatives
Application recommendation:
- Before every maintenance treatment, prior dry and damp cleaning with OLI-NATURA wood soapis recommended. Allow the surface to dry completely.
- Shake the container well before use.
Small surfaces (furniture)
- White pad or soak a cotton cloth with maintenance oil and work it into the wood.
- Within 10 minutes, remove the wet oil with a dry cotton cloth/oil-absorbing cloth and polish. No excess oil may remain.
- Protect from water during the curing period and do not clean with a damp cloth.
Large surfaces (floors):
- Apply maintenance oil evenly in a thin coat using a sprayer or floor mop. Apply more oil to dry areas.
- Within 10 minutes, work the wet oil in with a Super Hand Pad in white or beige under the pad holder for telescopic handle
- . Alternatively, you can use a single-disc machine. Polish until the surface appears even. Super Hand Pad Finally, polish the surface with a oil-absorbing cloth in white or
- Protect from water during the curing period and do not clean with a damp cloth.
. No excess oil may remain on the surface. Drying:
Allow the surface to dry for at least 12 hours before use. Overnight is preferable. Do not wipe with a damp cloth during the first few days. Coverage:
Depending on the application and the absorbency of the substrate, 10-20 g/m² per coat. NOTE:
Coverage depends on the type of wood and the absorbency of the substrate. Excess material on non-absorbent areas delays drying, as do low temperatures and/or excessively high humidity and/or excessively high wood moisture content.
The maintenance oil is recommended for refreshing oxidatively oiled surfaces. Please do not use it on UV-oiled finished parquet, as the maintenance oil requires an "open-pore system". If in doubt, test on a concealed area. NOTE ON THE RISK OF SPONTANEOUS COMBUSTION:
The product is not subject to labeling requirements. The mixture is not classified as hazardous within the meaning of Regulation (EC) No. 1272/2008. It does not need to be labeled with GHS hazard pictograms or signal words and is not classified as dangerous goods.
Safety instructions
Oil-soaked rags/pads can self-ignite due to heat accumulation! Therefore, clean them immediately after use or store them under water. Keep out of reach of children.
P102 Keep out of reach of children
Any questions? - We’re happy to help!
Frequently bought together
*gilt für Lieferungen innerhalb Deutschlands, Lieferzeiten für andere Länder finden Sie in den Versandbedingungen