The OLI NATURA® H2O-Hardener is the B component for OLI NATURA® Scandic-Oil Classic and Scandic-Oil For Furniture. The additional cross-linking supports curing and can accelerate hardening as well as the chemical resistance of the treated surface.
The areas of application depend on the respective Scandic-Oil. Mix the hardener thoroughly with the oil in the prescribed ratio shortly before processing.
Mixing ratio by volume – oil : hardener
10:1 – Scandic-Oil Classic and Scandic-Oil For Furniture
-
1 liter of oil + 100 ml of hardener
-
2.5 liters of oil + 250 ml of hardener
-
5 liters of oil + 500 ml of hardener
Mix only the required amount and process immediately. Observe the information in the technical data sheet for the respective Scandic-Oil.
Pot life: 2–3 hours. Do not process further after this time.
Mixing and processing
- Shortly before application, mix H2O-Hardener at a ratio of 10:1 (oil : hardener) by volume thoroughly with OLI NATURA® Scandic-Oil Classic or Scandic-Oil For Furniture Do not mix on the wood surface.
- Mix only the required amount and process immediately. Do not return mixed material to the original container.
- Prepare the substrate and apply according to the technical data sheet for the respective Scandic-Oil.
Pot life
- Process the oil-hardener mixture within 2–3 hours Do not process after the pot life has expired.
- Processing conditions and drying
Do not process below
- +15 °C Observe the temperature specifications and information on relative humidity in the technical data sheet for the respective Scandic-Oil. Ensure adequate ventilation during and after processing.
- Observe the drying times and load-bearing capacity according to the technical data sheet for the respective Scandic-Oil. Protect from water until fully cured.
- Additional information:
Before processing, refer to the Technical Data Sheet and the Safety Data Sheet in the “Downloads” section. beachten.
Information on diisocyanate training
The product contains less than 0.1% by weight of diisocyanate monomers. No diisocyanate training obligation applies under Regulation (EU) 2020/1149. Required instruction and protective measures remain in place.
Labelling in accordance with Regulation (EC) No 1272/2008 (CLP)
UFI: RU70-DVY7-3N09-HQEU
Signal word: Warning
Hazard-determining component: Aliphatic polyisocyanate.
Hazard statements
- H317: May cause an allergic skin reaction.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
- H412: Harmful to aquatic life with long-lasting effects.
Precautionary statements
- P102: Keep out of reach of children.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
- P302+P352: IF ON SKIN: Wash with plenty of water and soap.
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P312: Call a POISON CENTER/doctor if you feel unwell.
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Supplemental hazard statement
Contains isocyanates. May produce an allergic reaction.
What advantages does OLI NATURA® H2O-Hardener offer?
OLI NATURA® H2O-Hardener supports curing throughout the coating through additional cross-linking and accelerates curing. It can increase the chemical resistance of the treated surface.
Which oils can I use with OLI NATURA® H2O-Hardener?
OLI NATURA® H2O-Hardener is approved for OLI NATURA® Scandic-Oil Classic and Scandic-Oil For Furniture . The mixing ratio is 10:1 by volume - oil : hardener. Example: 1 liter of oil + 100 ml of hardener. Follow the information in the technical data sheet for the respective Scandic-Oil.
Is OLI NATURA® H2O-Hardener a thinner?
No. OLI NATURA® H2O-Hardener is a reactive hardener component. It supports the cross-linking and curing of the water-based oil and is not intended for thinning.
Can I mix the oil and hardener directly on the wood surface?
No. Mix OLI NATURA® H2O-Hardener thoroughly with the Scandic-Oil before application. Prepare only the required amount and use it immediately.
How long can I use the mixed oil?
After adding OLI NATURA® H2O-Hardener, the pot life is 2-3 hours. Do not use it after the pot life has expired.
Can I store the oil-hardener mixture?
No. The reaction begins when the hardener is mixed in. Use the mixture within the pot life and do not return it to the original container.
What do I need to consider during application?
Ensure adequate ventilation. Do not inhale vapors or aerosols. Avoid skin contact and wear protective gloves, protective clothing, and eye protection. Follow the labels and safety data sheets for the hardener and Scandic-Oil.
How long can OLI NATURA® H2O-Hardener be stored?
In the unopened original container, OLI NATURA® H2O-Hardener can be stored for six months when stored in a dry place between +5 and +30 °C . Protect from water, moisture, heat, and direct sunlight.
Can I continue to use opened OLI NATURA® H2O-Hardener?
Close the container tightly immediately after each use and protect it from water and moisture. The stated shelf life of six months applies to unopened original containers; no separate storage period is specified for opened containers.
Any questions? - We’re happy to help!
*gilt für Lieferungen innerhalb Deutschlands, Lieferzeiten für andere Länder finden Sie in den Versandbedingungen