Any questions? - We’re happy to help!
Frequently bought together
Blog posts Show all
*gilt für Lieferungen innerhalb Deutschlands, Lieferzeiten für andere Länder finden Sie in den Versandbedingungen
color oil
A01390_RF
kostenfreier Versand ab 250,00 €*
Sichere Zahlungen
The »OLI-NATURA Projektöl« based on natural oils is used for the colored treatment of furniture, stairs, and floorboards made from almost all types of wood. It has a solids content of 60%, penetrates deep into the pores, and reliably protects the wood from within. It does not form a surface layer, but instead provides an open-pore impregnation. Thanks to the project oil’s high self-penetration, it is particularly easy to apply and highly productive. With just one to two applications, extremely water- and dirt-repellent wood surfaces are achieved that are easy to maintain and repair.
There are four colors that preserve the natural charm of the wood and enhance the tactile quality of the surface. The pigments preserve the wood’s grain structure and give the surface a natural color. At the same time, the UV-stable color pigments help counteract the wood’s natural color change for as long as possible.
The project oil is ideal for all pickled, untreated, sanded, or new wood surfaces, and is also suitable for oriented strand boards (OSB) and cork indoors: whether for wooden or frame furniture, wall coverings, doors or kitchen furniture, parquet floors, or stairs.
Easy to apply: Depending on the application, the product is applied in one or two working steps with a brush, pad, or oil roller, so that the entire wood surface is evenly wetted with a glossy coating. After a short penetration time, the excess is simply removed with a cotton cloth/oil-absorbing cloth and polished again. If required, a second application can be made after overnight drying without intermediate sanding.
For furniture subject to normal wear, a single application is generally entirely sufficient. Floors, stairs, or heavily used furniture, however, require more protection. A second application is recommended here.
To test the effect of the oil, we offer you a practical sample size.
Quality: The »OLI-NATURA Projektöl« is based on modified vegetable oils such as linseed oil, medical-grade isoparaffin, and lead- and cobalt-free drying agents. We deliberately avoid using critical substances such as preservatives, formaldehydes, aromatics, biocides, cobalt salts, and oximes.
The product dries inside the wood in combination with atmospheric oxygen to form a tough-elastic finish. The oiled surface remains open-pore and breathable. Due to its diffusion openness (water vapor permeability), the treated wood can absorb moisture from the indoor air and release it again when needed. This improves the indoor climate and increases people’s well-being.
The cured material is harmless to humans, animals, and plants. It complies with DIN EN 71-3 (safety of toys) and DIN 53160 (resistance to saliva and perspiration) and is a construction product approved by the German Institute for Building Technology (DIBt).
Application instructions:
Sand the wooden surface carefully, starting with coarse sanding; use P180-240 for the final sanding of furniture and P100-150 for floors. The surface must be dry, thoroughly cleaned, and free of oil, wax, grease, silicone, and sanding dust. Apply the material at room temperature and shake/stir well.
For furniture:
For parquet flooring:
Consumption: 1-2 coats | Depending on the absorbency of the substrate, approximately 40-50 g/m² per coat (20-25 m²/l)
Drying: Depending on humidity and temperature, the surface is dust-dry after 1-2 hours and fully cured after 2-3 days. Protect it from water during this time.
Consumption and drying depend on the type of wood and the absorbency of the substrate. Excess material on non-absorbent areas delays drying, as do low temperatures and/or excessive humidity and/or excessive wood moisture.
Cleaning brushes and tools: For environmentally friendly cleaning, we recommend our OLI-NATURA brush cleaner
NOTE REGARDING THE RISK OF SPONTANEOUS COMBUSTION: Oil-soaked cloths/pads can spontaneously combust due to heat buildup! Therefore, clean them immediately after use or store them under water. The product itself is not self-igniting.
Only a few care measures are needed to keep the surface in a beautifully maintained condition over time. Dust deposits, for example, can simply be wiped off with a dry or, if necessary, damp cloth.
Parquet floors, on the other hand, should be vacuumed or swept daily, as sand and dust can cause fine scratches. Adhering dirt can be quickly removed with a mild wood soap. It is important to avoid excessive moisture and standing water.
At the same time, the oiled wood should be refreshed from time to time with »OLI-NATURA Projektöl« or the »OLI-NATURA Holzpflegeöl« . For normal maintenance cleaning, we recommend OLI-NATURA wood soap. This replenishes the wood's pores with oil and renews its protective effect. After such treatment, the wood is antistatic and therefore attracts less dust.
In addition, the oiled surface can be easily refinished, which is not possible with lacquered surfaces. The affected area can be lightly sanded locally and retreated without having to renovate the entire surface.
Hazard-determining components for labeling
Materials contaminated with the product, such as cleaning rags, paper cleaning towels, and protective clothing, may spontaneously ignite after several hours.
Safety instructions
P102 Keep out of reach of children
*gilt für Lieferungen innerhalb Deutschlands, Lieferzeiten für andere Länder finden Sie in den Versandbedingungen