The hardener is a B component for our 2K CRYL coatings for very heavily used areas. The hardener increases the chemical and mechanical resistance of the following spray coatings:
- OLI-CRYL 25.50 I 1K+ 2K multilayer coating,
- OLI-CRYL 40.55 I 1K+2K color lacquer
- OLI-CRYL 40.40 I 1K+2K filler/insulating filler
The B component can optionally be added to the solvent-based spray coatings immediately before application. Once the hardener is added, the cross-linking reaction between the base coating and the hardener begins immediately. Depending on the base coating, the pot life is approximately 8 hours.
Product intended for professional use only!
The product contains less than 0.1% diisocyanate monomers and may therefore be used without additional training.
TESTING STANDARDS
- Formula free from: toxic heavy metals, halogenated hydrocarbons (CKW, FCKW), polychlorinated biphenyls and terphenyls (PCB + PCT), pentachlorophenol (PCP), and formaldehyde.
- The product contains less than 0.1% diisocyanate monomers and may therefore be used without additional training.
APPLICATION INSTRUCTIONS
- Optimal application conditions at 20 °C and 50% relative humidity
- For details on application, please refer to the Technical Data Sheet for the coating component
- Shortly before use, thoroughly stir the hardener into the base lacquer in the specified mixing ratio. Allow the mixture to stand for 10 minutes before application.
- Seal opened containers tightly and use up as soon as possible. Mixed material residues must not be allowed to cure in closed containers.
- The end of the pot life is not indicated by a change in viscosity. Do not pour excess material back.
Mixing ratio
OLI-CRYL 25.50 | 1K+2K multilayer lacquer
Mixing ratio: 10:1 (10%)
Pot life: Max. 8 hours
OLI-CRYL 40.55 | 1K+2K color lacquer
Mixing ratio: 10:1 (10%)
Pot life: Max. 8 hours
OLI-CRYL 40.40 | 1K+2K filler/insulating filler
Mixing ratio: 10:1 (10%)
Pot life: Max. 8 hours
SAFETY INFORMATION
WARNING
The product contains less than 0.1% diisocyanate monomers and may therefore be used without additional training.
Regulation (EC) No. 1272/2008
Hazard-determining components for labelling: Hexamethylene-1,6-diisocyanate, homopolymer; n-butyl acetate
Signal word: Warning, flammable liquid and vapour
Hazard statements
H317 May cause an allergic skin reaction.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P405 Store locked up.
Precautionary statements
Special labelling of certain mixtures
EUH204 Contains isocyanates. May produce an allergic reaction.
Any questions? - We’re happy to help!
Frequently bought together
*gilt für Lieferungen innerhalb Deutschlands, Lieferzeiten für andere Länder finden Sie in den Versandbedingungen